Introduction
TheHS6210 is a member of the low-cost, high-performance family of intelligent 2.4 GHz RF transceivers with embedded microcontrollers. The HS6210 is optimized to provide a single chip solution for Ultra Low Power (ULP) wireless applications. The combination of processing power, memory, low power oscillators, real-time counter,and arange of power saving modes provides an ideal platform for implementation of RF protocols. Benefits of using HS6210include tighter protocol timing, security, lower power consumption and improved co-existence performance. For the application layer the HS6210 offers a rich set of peripherals including: SPI master, PWMand so on.
Product Features
Features of the HS6210 include:
► Fast 8-bit microcontroller:
♦ Intel MCS 51 compliant instruction set
♦ Reduced instruction cycle time, up to 12 times compared to legacy 8051
► Memory:
♦ Program memory: 10 kB of ROM
♦ Internal RAM: 256Byte
♦ User Data memory: 128byte OTP
► A number of on-chip hardware resources are available through programmable multi-purpose input/output pins:
♦ 11GPIO
♦ SPI master
♦ 6PWMs
♦ 3 External interrupts
► High performance 2.4 GHz RF transceiver
♦ True single chip GFSK transceiver
♦ Enhanced ShockBurst™ link layer support in HW:
• Packet assembly/disassembly
• Address and CRC computation
• Auto ACK and retransmit
♦ On the air data rate 250kbps, 500 kbps, 1 Mbps or 2 Mbps
♦ 125 RF channels operation, with 79 (2.402 GHz –2.480 GHz) channels within 2.400–2.4835 GHz
♦ Short switching time enable frequency hopping
► System reset and power supply monitoring:
♦ On-chip power-onreset
♦ Watchdog timer reset
► On-chip timers:
♦ Three16-bit timers/counters operating at the system clock (sources from the 16 MHz on-chip oscillators)
• Timer 0, Timer 1 ,Timer 2 are compatible to standard 8051
♦ One 24-bit timer/counter operating at the low frequency clock (32kHz)
► On-chip oscillators:
♦ 16 MHz crystal oscillator XOSC16M
♦ 16 MHz RC-oscillator RCOSC16M
♦ 32kHz RC-oscillator RCOSC32K
► Power management function:
♦ Low power design supporting fully static stop/ standby
♦ Programmable MCU clock frequency from 125 kHz to 16 MHz
♦ On chip voltage regulators supporting low power mode
♦ Watchdog and wakeup functionality running in low power mode
Applications
• Wireless PC peripheral devices
• Mouse, Keyboard
• Remote Control
• Consumer Electronics
• Toys
• personal health and recreation facilities
• Smart Home